Book Download

Download Brochure

News and Feeds

News and Feeds

Home Automation Solutions

Dec 31, 2012   //   by admin   //   Consulting  //  No Comments

 

We are here to help each one of you wether you run a company or a family to give you ideas about how to transfer your way of living into a sustainable and environmental friendly one. We help you identify the areas in your life where you can bring a change that can bring together a bigger change for the future of our children.

If you are an Organization with a determined interest to turn green both in operations and support functions, we will help you with advice and delivering of solutions as well. We can advice you on various sustainable practices both in terms of economic and environmental aspects.

If you run a family and belong to one of those special community who would like to adopt green methods to nurture a generation of children who would follow down your foot steps, we can help you to achieve the same. We can advice on a broad range of solutions to bring an elevated feeling of living a much sustainable living style and thus fulfilling our duty to the planet.

 

 

 

We advice on a wide range of services that includes but not limited to as given below:

 

Energy Conservation:

One of the most sought after but overlooked aspect in any institution. Regardless of the reasons being lack of awareness or lack of conscious implementation, this remains a challenge in many aspects. We advice on various practices that could be adopted to conserve the energy not just limited to electricity but also other forms of energy like cooking gas and other fuel derivatives. We also help you achieve these conservation targets by skillful methodology. Our results become visible after a comprehensive comparison with the previously documented energy consumption data

To know how conserving energy contributes much more to our planet, click here

 

Heating,Cooling and Lighting Solutions:

If you would like us to just look at the alternatives for Heating,Cooling and Lighting without bringing any changes in the existing infrastructure, we can definitely suggest alternative low power consuming replacements. For instance, the lighting solutions can be replaced with equivalent LED alternatives that bring out the same luminous intensity at a lesser cost wattage.

To know how the world is moving to alternative heating,cooling and lighting solutions, click here

 

Waste Management     (Disposal & Recycle Management)

Certain wastes cannot be contained in the building infrastructure. Depending on the nature of the waste, it needs to be handled properly to achieve the maximum cleanliness at the minimum cost. Due to the crude nature of the waste creation process, it becomes hard to control and achieve the required disposal parameters. We can help you to rise upto that challenge and develop a more clean environment at the lowest expense.

Though the concept of Recycling is quite familiar, the challenges towards achieving it keeps most of these initiatives in books. We would like to take the hands on approach to demonstrate how the same can be achieved and suggest the best solutions to handle it. Recycled products can be fed back into the system and thus creating a repetitive circle of materials movement and thereby avoiding extra expense. Recycling systems can be kept as part of the existing system and thus avoids the need of external services provider as well.

Rain water collection and Liquid Waste management

Rain is a perennial source of water if we employ the right methods to collect and re-source them. We advice and assist in enabling innovative solutions for an efficient collecting system. We also prepare methods to store them for longer period of time which could be recycled for further uses and thus avoiding the energy intensive process of procuring more water.

We provide consultations regarding various waste water treatment methods. Though many process have been identified for commercial use, we identify the right solution for your ecosystem with the minimum breakage in the system along with lesser cost. It also include custom made tailored solutions which are region specific thus reducing idle expenditures. This end product could be used on a wide range of non-edible purposes like gardening,cleaning etc. On a higher note, we experimentally prove that the recycled water suitable for all kinds of uses.

To know more about waster water recycling and rain water collection, click here

Securing Carbon Credits

With various government initiatives to introduce a green drive in the various industries and companies catering to them, we stand the best choice to give you advice on the various methods that can achieve the same for you. Carbon credits are awarded when you contribute towards the environment in various ways such as cutting down emissions, purchasing renewable energy based power and much more. In the recent times, carbon credits acts as symbol of an organization’s responsibility towards its nation and planet. Several tax related benefits are also in the system.

We help you in identifying the various opportunities within your system to make you eligible for those credit points without any dent in the productivity and also in implementing the same.

Energy Independency from Fossil Fuel Systems.

We all rely on grid power supply for our daily electricity needs. On the failure of this primary system, the same is handled by conventional fossil fuel based power systems such as diesel or kerosene based generators.
While we all know that they are energy intensive and causes both noise and air pollution not to mention the costs associated with maintenance. We can help you to enable the right alternative powering systems like Fuel Cell, Solar Power etc. We help in both charting the tailored design of solutions along with implementing them. Such a practice also unlocks the true potential of your infrastructure which otherwise remains a dead investment.

 

We approach a case based on the over-the-top view. We see things on a macro-level and identify the flow of process and the outcome of the same. Our strategy towards the solution is broadly based on 4 stages as mentioned below.

Isolate:

We start with isolating each processes in the eco-system. We identify the route map and create process charts for each activities happening within the specific eco-system. Certain processes are not interconnected while many are. This chain identification enables us to identify the extend of the effect while applying changes through any aspect. This isolation of process could extend to all the movable,immovable,physical and non-physical aspects of the eco-system. Once such an isolation process has been completed we move to the next step of positive identification of significance

Identify:

Identification process starts from the half stage of Isolation process. What we try to achieve by identification is the ability to separate the processes and lay them out for further review. It is at this stage we identify potential flaws and systemic break downs which could be hampering the neighboring or connected processes. We also understand the butterfly effects applicable in the identified processes. Such a study is much important as any small changes could negatively hamper and otherwise established system.

Research:

Research forms the core operation where the ultimate solution takes its shape. We go though existing case studies and also that our partners across the globe to see the possible changes that could be applied. We will also take into consideration the practical results of such established practices. Once our research is completed, we lay out the possible alternatives in tandem with the existing processes.

Localization:

Localization does the filtering process for selective methodology. As our philosophy has always been revolving around region specific solution, this stage tailors the solution to suit the particular ecosystem. Various parameters are considered while we conduct this study and measured on a scale of 10. The one process which satisfies the maximum criteria on the given factors of ecosystem qualifies as the solution. This would also mean tweaking of process which might even come out as an altogether different solution from our research output.

Implementation:

We take our final stage to completion after the approval of the site inspection team(which includes a team from clients and independent experts). The implementation process is managed and even performed(on request) by our divisions specializing in the same. This could mean a single division or a combination of several divisions to bring out the complete solutions.

To read other articles click here

Our knowledge and understanding of the environment is much more deeper than the knowledge derived from reading or studying. Our teams are always inspired to travel exclusively across the globe to watch and observe the planet in a multi- dimensional point of view. During these travels, they come across various challenges faced by people in preserving the environment and the solutions found in regards to the same. They also learn how new ways of exploitations are affecting the balances of those local ecosystems. These first hand experiences have given us the understanding of the systemic flaws associated and also how certain communities have tackled them successfully.

Though our interest spans across all kinds of negative effects on environment, we are limiting this study to effects caused by industries and their practices. Below are the major resultant factors that happens due to mis-management of available resources.

  • Carbon Emissions

  • Deforestation

  • Ocean Pollution

  • Ozone layer depletion

  • Land Degradation

 

Carbon Emission:

We are not here to explain how carbon emissions affects our plant for we are all aware of its various consequences. We are here to explain the system of emissions to you so that the chain is understood for undertaking proper steps of prevention.

Any industry if they use the existing resources thoughtfully and diligently, the emissions could be cut by a whopping 40%. Such a practice doesn’t require complex systems change or expansion plans. Carbon emissions are resultant of any energy intensive process involving fossil fuels. Such a system of emission can be

Direct emission

Direct emission involves any activities initiated by the end industry client for the direct use of its benefits. Such an emission system gives a direct idea of the carbon foot print left behind. Fossil Fuel based generators are a good example of the same following which is grid power consumption based on fossil fuels like natural gas and coal. In most cases the share of emissions of Direct emission can vary from ranges of 35% to 55%

Indirect Emission:

Indirect Emissions are resultant of the support functions employed by the primary industry through various suppliers. It also involves the use of any equipments/machines by the primary industry for its use internally. Such manufacturing process and energy consumed by direct suppliers contributes close to 35% to 45% of the indirect emissions. It is at this stage where the accountability becomes less clear due to the system being branching out and the benefits being spread out to various sub-systems.

Third Degree indirect emissions:

Though quite far from the primary industry, third degree indirect emissions forms 15% to 25 % of the indirect emissions caused by the same. These are resultant of the emissions caused by the suppliers of the suppliers and so on. The picture becomes hazy once the chain is lengthened giving a lack of clarity on the consumption. But from the ratio of emission vs benefit, we can safely conclude the above understanding.
Once we have branched out the systems of emission, it becomes easier to identify where to start. This also gives an idea of the effect it could bring on productivity based on its exposure. So, our aim is to tackle the emission based on the systems of emission. If the system is not viewed the end client specific, the indirect emissions forms the bulk of emissions. But due to the benefits being shared by various sub-systems, it wouldnt be fair to point the finger on the one client in picture. If sufficient processes are identified to reduce the direct emissions, it achieves a major reduction in the overall emission from specific client contribution. The process is easier as the decision making body is inside the primary system. It is understood that Indirect emissions cannot be directly controlled due to limited aspects of exposure to its systems and decision making process. Such emissions can be controlled by deleting or replacing certain process from the system which are either energy intensive or providing less returns for the amount of energy spent. Alternative processes could be employed to achieve the same

Once any of these emissions causing processes are reduced, the effect of this wave is channelled across the various subsystems through its suppliers. Such a practice can have far reaching effects beyond understanding.
To know more about how we tackle the other challenges through innovative and logical understanding of phenomenon, please write to usinfo@anton-solutions.com

Leave a comment

Enter Captcha Here : *

Reload Image

Social Icons

Idea Forum

Have a revolutionary Idea?

Tell Us or Discuss in forum to make it real

Facebook Likebox

Twitter Feeds